Hydro-Brake® Chamber  
   

  • Overview
  • Enquiries
  • Download Drawings
Fields marked * are required.

Client Information
*Contact Name:
*Company:
*Address:
*Town:
*County:
*Postcode:
*Tel:
Fax:
*E-mail:
Date of Enquiry:
 
Project information
*Project Name:
Site Location:
   
Design Criteria  
Design Flow: l/s
Design Head: m
TWL: m
Outlet Invert Level: m
   
Type of System  
Stormwater
Combined
Foul
New
Existing
   
Application Required  
SuDS Scheme
Adoptable sewer
Housing
Commercial/Industrial
Highway Drainage
Inlet Works
Other (Please specify)
Adoptable? Yes No
Type of Storage Proposed:
   
Other special options available, Tick to request:
Vortex Suppressor Pipe
Adjustable Intake Gate
Rodding Pipe
Pressure Applications
Dry Mounted
 
Other Comments
Please enter any additional comments or design considerations:
 
Specification

All units are generally:

  • fitted with a remotely controlled emergency pivoting by-pass door.
  • manufactured in grade 304 stainless steel as standard.
  • designed to be wet mounted.

Vortex flow control shall comply with the following:

  • Vortex flow control manufactured in grade 304 stainless steel to BS 1449 minimum 3 mm. thick (or greater depending upon hydraulic head).
  • Hydro-Brake ® Flow Control by Hydro International, Shearwater House, Clevedon Hall Estate, Victoria Road, Clevedon, BS21 7RD, Tel. 01275 878371.
  • Incorporate a pivoting by-pass door on the front face of the flow control to allow direct access to the downstream pipe, operated from ground level by means of a stainless steel rope.
  • The design criteria for the unit shall match that specified by the engineer plus that shown on the head / discharge curve supplied by the manufacturer.
  • The ‘flush flow' and ‘kickback flow' shall match that specified by the engineer as well as that shown on the head / discharge curve supplied by the manufacturer.

Please check that all information is correct, then... for free design service.