Eutek SlurryCup™ - Sludge Degritting and Headworks Washing

Simultaneous Grit Washing and Classification

The "all-hydraulic" design of the Eutek SlurryCup has no internal moving parts, which increases reliability. Two levels of "washing" produces clean grit ready for dewatering.

The Eutek SlurryCup is extremely effective at washing grit captured at the preliminary treatment stage by the grit channel, aerated grit chamber, vortex grit collector, or grit separator. The Eutek SlurryCup minimizes organic content which reduces objectionable odors and reduces the volume hauled to landfill. The Eutek SlurryCup meets the challenges of separating and classifying grit as small as 75 micron (200 mesh).

Sludge Degritting Solution

Primary sludge degritting minimizes deposits in anaerobic digesters and reduces abrasive wear on pumps, centrifuges, and other downstream equipment. This can be the most economical location in a wastewater treatment plant to remove grit. The Eutek SlurryCup uses two levels of separation and classification to capture and wash very fine grit, as small as 75 micron sand, from primary sludge up to 1.5% total solids.

Click to download the Eutek SlurryCup brochure

Applications

• Sludge degritting
• Grit washing

Advantages

• Increasing performance as flows increase
• All hydraulic, non-mechanical design with no internal moving parts
• Compact design
• Simple to operate
• Cost effective and easy to install