|
|
SludgeScreen™
A Superior Screen with Reverse Function Versatility
Click to download the SludgeScreen™ leaflet
The SludgeScreen™ is a horizontal in-line coarse material
separator comprising an inlet screening zone and a pressing
(compacting) zone. The coarse material retained on the stainless
steel inner screen surface, is transported to the stainless
steel pressing zone and onward to the outlet by an archimedean
screw. Compacted coarse material (screenings) are discharged
by the action of a regulating cone controlled by detection
of increased torque on the drive motor, into a suitable
container.
The optimum pressure for sludge supply to the screen is
between 1 and 1.2 bar. Whilst the unit will tolerate higher
pressure for brief periods, continuous increased pressure
is not desirabe
Applications
| • |
Designed for either direct tanker, pumped
feed or combination |
| • |
Ship-board preliminary treatment |
| • |
Primary, secondary or imported sludge screening |
Advantages
| • |
Enclosed system, reducing odour problems.
|
| • |
Screening, dewatering and coarse material discharge
in one operation |
| • |
No washwater requirement. |
| • |
Fully automatic for either continuous or intermittent
screening of sludges with varying dry solids content. |
| • |
Designed for either direct tanker, pumped feed or
Combination. |
| • |
Continuous coarse material separation under pressure with loss of pressure dependent on sludge thickness only. |
| • |
3mm to 10mm diameter screen perforations. |
| • |
Stainless steel components. |
| • |
Robust spheroidal C.I. housings at inlet and outlet
ends. |
| • |
Fully manufactured, assembled and tested in-house. |
| • |
Fully compliant, user friendly WIMES 3.04 control
panel. |
|
 |
